Planet GS-4210-16P2S User Manual Download

Page: 298 / 431

User’s Manual of GS-4210-16T2S_24T2S_16P2S_24P2S_48T4S

298

4.9.10 RADIUS Server

This page is to configure the RADIUS server connection session parameters. The RADIUS Settings screens in

Figure 4-9-59

Figure 4-9-60

and

Figure 4-9-61

appear.

Figure 4-9-59:

Radius Server Setting Page Screenshot

The page includes the following fields:

Object

Description

•

Retries

Timeout is the number of seconds, in the range 1 to 10, to wait for a reply from a

RADIUS server before retransmitting the request. Default is 3.

•

Timeout for Reply

Retransmit is the number of times, in the range 1 to 30, a RADIUS request is

retransmitted to a server that is not responding. If the server has not responded

after the last retransmit it is considered to be dead. Default is 3.

•

Dead Time

The Dead Time, which can be set to a number between 0 and 2000 seconds, is

the period during which the switch will not send new requests to a server that has

failed to respond to a previous request. This will stop the switch from continually

trying to contact a server that it has already determined as dead.

Setting the Dead Time to a value greater than 0 (zero) will enable this feature, but

only if more than one server has been configured. Default is 0.

•

Key String

The secret key - up to 128 characters long - shared between the RADIUS server

and the switch.

Button

: Click to apply changes.

Summary of Contents for GS-4210-16P2S
















































































































































































































































































































































































































































Search results

Summary of Contents for GS-4210-16P2S

Reviews:

Related manuals for GS-4210-16P2S

Brands by name

Popular brands

Planet GS-4210-16P2S, User Manual

Search results

Summary of Contents for GS-4210-16P2S

Reviews:

Related manuals for GS-4210-16P2S

Brands by name

Popular brands