Planet GS-4210-16P2S User Manual Download

Page: 64 / 431

User’s Manual of GS-4210-16T2S_24T2S_16P2S_24P2S_48T4S

4.2.6 Log Management

The Managed Switch log management is provided here. The local logs allow you to configure and limit system messages that

are logged to flash or RAM memory. The default is for event levels 0 to 3 to be logged to flash and levels 0 to 6 to be logged to

RAM. The following table lists the event levels of the Managed Switch:

Level

Severity Name

Description

Debug

Debugging messages.

Informational

Informational messages only.

Notice

Normal but significant condition, such as cold start.

Warning

Warning conditions (e.g., return false, unexpected return).

Error

Error conditions (e.g., invalid input, default used).

Critical

Critical conditions (e.g., memory allocation, or free memory error - resource

exhausted).

Alert

Immediate action needed.

Emergency

System unusable.

4.2.6.1 Logging Service

The Managed Switch system local log information is provided here. The local Log screens in

Figure 4-2-12

and

Figure 4-2-13

appear.

Figure 4-2-12:

Logging Settings Page Screenshot

The page includes the following fields:

Object

Description

•

Logging Service

Enabled

: Enable logging service operation.

Disabled

: Disable logging service operation.

Summary of Contents for GS-4210-16P2S
















































































































































































































































































































































































































































Search results

Summary of Contents for GS-4210-16P2S

Reviews:

Related manuals for GS-4210-16P2S

Brands by name

Popular brands

Planet GS-4210-16P2S, User Manual

Search results

Summary of Contents for GS-4210-16P2S

Reviews:

Related manuals for GS-4210-16P2S

Brands by name

Popular brands