Pitney Bowes relay 2000, Operator'S Manual

Page: 64 / 92

4 • OMR Scanning
4-12 SV63139 Rev. A
OMR Troubleshooting
Error Recovery for OMR Jobs
If the inserter stops during an OMR job, and indicates one of the error
messages listed below, follow these steps.
1. Press the Clear Deck key on the control panel. Any envelope at the
insertion area will eject into the stacker.
2. The remaining pages of the current set will feed/fold and eject into
the stacker. Manually insert into the envelope if necessary.
3. The FIRST page of the NEXT set will pre-feed into the feed rollers
and stop. Pull the sheet back to the normal feed position .
4. Resume operation.
Error Recovery for Accumulation Jobs
If the inserter stops during an accumulation job, follow these steps.
1. Press the
Clear Deck
key on the control panel
2. The envelope at the insertion area ejects into the stacker. You must
manually remove the remaining pages of the set from the feeder.
3. Fold/insert the remaining pages into the envelope.
4. Resume operation once you’ve determined the cause of the
stoppage.
Error Recovery for Empty Feeders
If any feeder runs out of material the inserter will stop, and the following
instructions scroll across the display.
1. Re-fill the empty tray.
2. Press
START to continue OR press STOP and Clear Deck .
3. Reload the feeders and proceed as required.