Pitney Bowes relay 2000, Operator'S Manual

Page: 32 / 92

2 • Program a Job
2-14 SV63139 Rev. A
Program a Non-Scanning Job
Follow this sequence of steps to program a non-scanning job.
NOTE: If scanning is not available on your system, begin with “Set Accumulation.”
Disable OMR Scanning if Functionality Exists
If scanning is enabled on your system, set it to OMR off.
1. When prompted, press
Change ( +/- ) to select OMR off .
2. Press Next (►) to accept the selection and advance to the next
setting.
Set the Fold Type
1. Press Change ( +/- ) to scroll through the fold types.
2. Press Next (►) to accept the fold type and advance to the next
setting.
Fold Types
C - Letter Z - Accordion Double Single
When the fold type is selected, the display indicates the correct orientation
of the paper for loading into the feeders:
FACE UP
HEAD FIRST
ABC
FACE DOWN
FEET FIRST
ABC
NOTE: For accumulation jobs, DO NOT manually change the automatic fold length
dimensions at the Fold A and Fold B settings.