Pitney Bowes relay 2000, Operator'S Manual

Page: 34 / 92

2 • Program a Job
2-16 SV63139 Rev. A
Set Sheet Feeder
1. Press Change ( +/- ) to scroll through the options .
2. Press Next (►) to accept the selection and advance to the next
setting.
First/Main Sheet Feeder Options (Non-Scanning Jobs)
Icon Option Description
On Double Detect Feeder on with the double detector
operating.
(The double detector stops
the inserter if two or more sheets feed
simultaneously.)
Off Feeder turned off for this job.
On Feeder on without the double detector.
Manual Feed (see the
description following
this table)
Able to manually feed collated sets. Only
available on sheet feeder 1.
Manual Feed Option
• The manual feed setting allows you to run stapled sets of up to five
sheets - a maximum of 100 lbs.(400 gsm) per set. The maximum
compressed thickness of the set
after folding
must not exceed 0.08
inches (2mm).
• The inserter waits for manual insertion of each set into sheet feeder 1
after which it will fold and insert the set automatically.
• The manual feed option is only available when Accumulation is set to
OFF.