Pitney Bowes relay 2000, Operator'S Manual

Page: 13 / 92

System Overview • 1
1-5
SV63139 Rev. A
3
Insert Feeder - Use this feeder to add additional inserts to
your envelope. Material fed from this feeder cannot be folded
by the inserter. However, this feeder is especially suited to
feeding pre-folded or thicker inserts.
4
Sealer Bottle - The sealer bottle is located on the rear of the
inserter on the right side. It is under a hinged cover, labeled
with the sealer icon. The sealer bottle provides sealing
solution to the envelope sealer.
5
Envelope Inverter - Transports the envelope into the stacker
face up .
6
Drop Stacker or Output Device
(not shown in image) -
Located at the exit of the inserter, this device collects finished
mailpieces. This device can be latched against the inserter when
not in use. Alternatively, a range of power stackers are available
which offer greater capacity than the standard drop stacker.
7
Fold Plate
-
This creates the desired fold in material fed from
the sheet feeder. The fold plate is automatically set from the
control panel.
8
Measuring Scale — The scale is located on the left side of the
inserter near the sheet feeders; used as an aid in measuring
material and envelopes.
9
Manual Advance Knob - The knob is located inside a cover
at the lower center of the inserter. Use it to turn the inserter
mechanisms by hand to help clear a material.
10
Envelope Feeder
-
Feeds envelopes into the inserting area
where they are filled with material requested from the other
feeder(s).