Pitney Bowes relay 2000, Operator'S Manual

Page: 69 / 92

Clear Material • 5
5-3 SV63139 Rev. A
Clear Material
The inserter is designed to assure maximum performance. In the event
of a material stoppage, the display flashes a symbol indicating where the
stoppage has occurred.
To clear a jam follow these steps.
1. Press
Clear Deck to attempt to feed the material through the inserter.
2. If this doesn’t work, manually remove the remove the trays and fold
plates related to the jam to gain access to the jammed material.
Manual Advance Knob
Once you locate the jammed
material, you may need to use
the manual advance knob to
manually feed paper out of the
grip of feed rollers.
The manual advance knob is
located behind the drop-down
cover at the left front of the
inserter.
Access Areas of the Inserter for Jam Removal
Sheet Feeders Tray - Remove and Replace
To remove the sheet feeder tray:
1. Lift the rear of the tray slightly
and pull it straight out from
the inserter.
NOTE: If the tray is loaded,
gently hold the material in place
to prevent it sliding forward as
the tray is removed.
To replace the sheet feeder tray:
1. Place the tray into its location guides in the side frames.
2. Lift the rear of the tray slightly and push it into the inserter. The tray
automatically drops into its correct position.