Pitney Bowes relay 2000, Operator'S Manual

Page: 49 / 92

3 ● Run a Job
3-9 SV63139 Rev. A
5. Aerate and fan the stack of
inserts to ensure the individual
pieces are not stuck together.
Loading orientation can vary
depending on the inserts being
run. As a general rule, load inserts
using the orientation guidelines in
the table below.
6. Let the wedge (material prop)
slide down behind the stack to
support the inserts.
Orientation Table for Loading Inserts
Insert Type Orientation
Slip Face up, bottom edge first
Reply Envelope Face up, top edge first
Pre-Folded Face up, closed edge first
Booklet Face up, bound edge first