Pitney Bowes relay 2000, Operator'S Manual

Page: 37 / 92

Program a Job • 2
2-19 SV63139 Rev. A
Set Fold A
1. Select the size of the first fold required.
NOTE: Depending on the settings you made earlier for fold type and paper
length, the inserter suggests the correct dimension for the first fold. Most of the
time this setting will prove satisfactory.
2. To change the standard fold setting, press Change ( +/- ) until the
length of required fold displays. The symbol | –––– | displays next to
the fold panel you are setting.
NOTE: The inserter automatically limits your options to available specifications
on your inserter. (As you change the length of fold A, the dimension of fold
B changes automatically to keep within the correct paper length and inserter
specifications.)
3. Press Next (►) to accept the fold value and advance to the next
setting.
Set Fold B
1. Select the size of the second fold required.
NOTE: Like fold A, the inserter suggests the correct dimension for fold B.
2. To change the standard setting, press Change ( +/- ) until the length of
fold required displays. The symbol | –––– | displays next to the fold
panel you are setting.
3. Press Next (►) to accept the fold value and advance to the next
setting.
•
Inserting jobs - continue to the Set the Envelope Depth setting .
• Fold-only job - there are no more job settings, skip to Confirming
the Job Setup.
Set Envelope Depth
1. Use the scale on the front cover to measure the envelope depth.
2. Press
Change ( +/- ) to scroll through the measurements (displayed
in mm).
3. Press Next (►) to accept the value and advance to the next setting.