Pitney Bowes relay 2000, Operator'S Manual

Page: 48 / 92

3 ● Run a Job
3-8 SV63139 Rev. A
Adjust and Load the Insert Feeder
The insert feeder feeds items that do not require folding. Depending on
configuration of your inserter, you may not have an insert feeder.
1. Use the side guide adjustment
knob to adjust the side guides
to the width of the inserts you
are running. Once adjusted,
back-off the adjustment knob
1/4 turn.
This sets the correct clearance
between the guides and inserts
.
2. Refer to the label located on
the insert feeder and match
your insert type with the icon
(letters A to D).
Identifying Your Insert
If the label indicates a range of
settings, we recommend you
select a higher number or letter for
a thicker the insert
.
3. Set the blue lever to the
number
required.
4. Set the separator shield to the
letter required.