Pitney Bowes relay 2000, Operator'S Manual

Page: 23 / 92

Program a Job • 2
2-5 SV63139 Rev. A
Program a Job
Setup Mode
1. Open the hinged cover to the
right of the display to access
the setup buttons.
2. Press Setup . The inserter
prompts for an access
code. (This code prevents
unauthorized personnel from
changing inserter settings).
3. Press Change ( +/- ) to increase
or decrease to access code 71 .
4. Press Next (►) to accept the
code and advance to the next
job setting.
Select the Job Number (New or Existing Job)
When prompted for the job number, follow these steps to select or create
the job. You can select an existing job and overwrite its current settings or
you can select an unused job and program new settings.
1. Press Change ( +/- ) to scroll
through the job numbers
until you find the desired job
number. (To identify an unused
job, scroll through the jobs until
there are no setup symbols
displayed on the screen.)
2. Press Next (►) to accept the
job number and advance to the
first setting.
NOTE: If you use an existing job number, the old settings will be overwritten by
the new settings you are adding.