Pitney Bowes relay 2000, Operator'S Manual

Page: 47 / 92

3 ● Run a Job
3-7 SV63139 Rev. A
Adjust and Load the Envelope Feeder
The envelope feeder feeds the outer envelope for the inserting job.
1. Use the side guide adjustment
knob to adjust the side guides
to the
width
of the envelopes.
Once adjusted, back-off the
adjustment knob 1/4 turn.
This sets the correct clearance
between the guides and envelopes.
2. Take the stack of envelopes;
aerate and fan it to ensure that
individual envelopes are not
stuck together.
3. Place the envelopes on the
feed deck with the flaps up and
trailing.
IMPORTANT! Check that lead
edge of the first envelope is under
the front feed roller and that the
stack of envelopes is shingled on
the deck as shown.
4. Let the wedge slide down
behind the stack so that the
envelopes are supported.