Program a Job • 2
2-3
SV63139 Rev. A
This section provides step-by-step instructions for setting up and saving a
new scanning or non-scanning job using the control panel. Programming a
job is typically a Supervisor activity.
Navigate Using the Control Panel
Open the hinged cover to the right of the control panel display to access
the setup buttons. Use the setup buttons to navigate the job programing
options. To help visually guide you through the programming sequence, an
asterisk (*) flashes on the control panel display next to the area being set.
• To access the setup buttons, open the hinged cover to the right of the
display screen.
• Use the
Prev
(◄) and
Next
(►) buttons to scroll through the available
settings.
• Once the desired setting displays, use the
Change
(
+/-
) buttons to
select options or set values within the settings.
Summary of Contents for relay 2000
