● An HSSDC2 (high-speed serial data connection)-to-HSSDC2 copper cable
is used.
● An SFP-to-SFP copper cable is used.
● An SFP-to-HSSDC2 hybrid copper cable is used.
Note: 2 Gb/s optical SFPs should not be inserted into any fabric port when the
SSF is configured to run at 4 Gb/s. If such an SFP is inserted into a fabric port,
the system disables the port, even after a restart of the Pillar Axiom 600 system.
Note: If the SSF is being configured for 4 Gb/s operation, the SFP modules must
be installed prior to connecting the optical cables.
All of the possible SSF and PMI cable combinations are fully detailed in the
Pillar
Axiom 600 SSF Cabling Reference for your system.
Related tasks
•
Connect the Pilot to Your Management LAN
•
Connect a Slammer to the Data Network
Chapter 4 Connect Data Cables
About Cabling the SSF and PMI
98
