Phytec L-827e.A3 phyCORE-i.MX 6UL/ULL, Hardware Manual, Page: 60 / 69

L-827e.A3 phyCORE-i.MX 6UL/ULL Hardware Manual
© PHYTEC Messtecknik GmbH 60
17 Camera Interfaces
The phyCORE-i.MX 6UL/ULL SOM offers one interface to connect digital cameras
[15]
. The signals of the parallel
CMOS Sensor Interface (CSI) are available together with an I
2
C interface at the phyCORE ‑ Connector to allow for
camera connectivity according to PHYTEC's phyCAM
‑
S+, or phyCAM
‑
P standard.
FIGURE 8: Camera Connectivity of the i.MX 6UL/ULL (Y2, G2, and G3)
On the phyCORE-i.MX 6UL/ULL SOM CMOS Serial Interface is brought out as parallel interfaces with 10 data bits,
HSYNC, VSYNC, MCLK, and PIXCLK. The upper CSI data bits D23 ... D10 are used for other features of the
phyCORE
‑ i.MX 6UL/ULL.
FIGURE 9: Parallel Camera Interfaces at the phyCORE ‑ Connector
The camera interface of the phyCORE ‑ i.MX 6UL/ULL includes all signals and is prepared to be used as phyCAM ‑ P, or
phyCAM ‑ S(+) interface on an appropriate carrier board. Please refer to Utilizing the Camera Interfaces on a Carrier
Board for more information on how to use the camera interfaces on a carrier board with different interface options.
15. Only i.MX 6UL/ULL microcontroller versions Y2, G2, and G3 are equipped with
one parallel CMOS Sensor Interface (CSI) to process the signals from the parallel camera interface.