L-827e.A3 phyCORE-i.MX 6UL/ULL Hardware Manual
© PHYTEC Messtecknik GmbH
5
1.2 Product Specific Information and Technical Support
In order to receive product-specific information on changes and updates in the best way also in the future, we
recommend registering at:
http://www.phytec.de/support/registrierung.html
or
http://www.phytec.eu/europe/support/registration.html
For technical support and additional information concerning your product, please visit the download section of our
website which provides product-specific information, such as errata sheets, application notes, FAQs, etc.
https://www.phytec.de/produkte/system-on-modules/phycore-imx-6-ul-ull/#downloads/
or
https://www.phytec.eu/en/produkte/system-on-modules/phycore-imx-6-ul-ull/?lang=en/#downloads/
1.3 Declaration of Electro Magnetic Conformity of the PHYTEC
phyCORE®
‑
i.MX 6UL/ULL
PHYTEC System on Module (henceforth products) are designed for installation in electrical appliances or as
dedicated Evaluation Boards (i.e.: for use as a test and prototype platform for hardware/software development) in
laboratory environments.
PHYTEC products fulfill the norms of the European Union’s Directive for Electro Magnetic Conformity in accordance
with the descriptions and rules of usage indicated in this hardware manual (particularly in respect to the pin header
row connectors, power connector, and serial interface to a host-PC).
1.4 Product Change Management and Information Regarding Parts
Populated on the SOM / SBC
With the purchase of a PHYTEC SOM / SBC you will, in addition to our hardware and software possibilities, receive
free obsolescence maintenance service for the hardware we provide. Our PCM (Product Change Management) team
of developers is continuously processing all incoming PCNs (Product Change Notifications) from vendors and
distributors concerning parts that are used in our products. Possible impacts on the functionality of our products
Warning
PHYTEC products lacking protective enclosures are subject to damage by ESD and, therefore, must be
unpacked, handled, or operated in environments in which sufficient precautionary measures have been
taken with respect to ESD-dangers. Only appropriately trained personnel such as qualified electricians,
technicians, and engineers should handle and/or operate these products. Moreover, PHYTEC products
should not be operated without protection circuitry if connections to the product's pin header rows are
longer than 3 m.
Tip
Implementation of PHYTEC products into target devices, as well as user modifications and extensions of
PHYTEC products, is subject to renewed establishment of conformity to and certification of Electro
Magnetic Directives. Users should ensure conformance following any modifications to the products and
implementing the products into target systems.