PerkinElmer RamanMicro 200 Series, Getting Started Manual

Page: 38 / 98

38 . RamanMicro 200 Series Getting Started Guide
Unpacking the Instrument
When the instrument has been delivered, please move it with care and avoid shaking or
dropping the spectrometer. Allow the instrument to equilibrate to room temperature for at
least 12 hours before opening. The instrument may have been stored at low temperature
prior to delivery and you should allow it to equilibrate to stop moisture condensing on the
internal electronics.
When unpacked, check that you have the following parts and check for any physical damage.
If there is any damage, do not continue with the installation. Contact your PerkinElmer
Service Representative immediately.
Part Number Description
RamanMicro 200 Series
Contains the microscope, the Raman module, the alignment camera
module, and the spectrometer module.
LX108870 Spectrum Std for Raman Software Kit
Contains the Spectrum Std Software CD (LX100877), the Raman
Instrument Configuration Disk (LX108869), the Raman Spectral Libraries
CD (L1321877), and the Spectrum Insight Software CD (LX108872)
L1323503 Laser key (x2)
L1321802 Mains PSU
L1320821 USB Cable
L1320264 External Interlock Override
L1323055
OR
L1323011
Manual Stage
Motorized Stage
L1865749 RS232 Cable (systems with motorized stages only)
L1860289 Stage Controller (systems with motorized stages only)
L1865723 Joystick and cable assembly (systems with motorized stages only)
L1181228 Polystyrene Sample
LX108897 SpectrumIMAGE Software Kit (systems with motorized stages only)
N1870151 Microscope Tools Kit
NOTE: Your instrument is intended for installation by a PerkinElmer Service Representative.
There are no user-serviceable parts in the RamanMicro 200 Series. The following
sections are provided for your information only.