PerkinElmer PINAACLE 900 Series, Customer Hardware And Service Manual

Page: 166 / 390

150
Installation
6. When you are done click Finish to save the position.
Reopen the Align Autosampler Tip Wizard and select the option: Check
autosampler tip alignment in the graphite tube to make any fine
adjustments.
To check and make fine-adjustments to the penetration depth of the
pipette tip in the graphite tube
The steps described in this section describe how to make sure the tip is properly
aligned in the tube. If it is not properly aligned, click
< Back and select Align the
autosampler tip in the graphite tube
.
Warning: UV Radiation – Risk of Eye Damage
The lamps may emit UV radiation which can damage your eyes.
Always wear UV-absorbing safety glasses when aligning the
autosampler.
Caution
Risk of damage to the pipette tip
The pipette tip enters the graphite tube when you issue the In Tube command.
The pipette tip can strike the edge of the injection hole if the autosampler arm
has not been aligned.
Make sure that the autosampler arm has been aligned before you issue the
In Tube
command.
!
Warning