PerkinElmer PINAACLE 900 Series, Customer Hardware And Service Manual

Page: 165 / 390

149
Installing the Sample Capillary
4. Use the TubeView window that is currently open on the WinLab32 for AA
workspace to see the tip in the tube.
5. Use the Depth Knob to set the depth of the autosampler tip in the tube so that
it is 1-2 mm above the platform; view the alignment within the TubeView
window. Only adjust in the down direction. If you adjust too low, click on the
< Back button and try again. Do not lower the pipette tip so far that it could
strike the platform.
Refer to the following figure for an example of a well aligned tip.
Figure 4-24. Alignment tip in the TubeView camera
Warning: UV Radiation – Risk of Eye Damage
The lamps may emit UV radiation which can damage your eyes.
Always wear UV-absorbing safety glasses when aligning the
autosampler.
Item Description
1 Tip
!
Warning
1