PerkinElmer PINAACLE 900 Series, Customer Hardware And Service Manual

Page: 157 / 390

141
Installing AS 900 Furnace Autosampler
6. Connect the other end of the flexible tube to the inlet fitting of the rinse pump.
You may have to shorten the flexible tube,
Figure 4-21. Sample and rinse bottle detail
Installing Sample Tray and Cover
Two sample trays are provided with the autosampler, one tray has 88 locations
while the other tray has 148 locations. Select the type of sample tray you are going
to use in the
Options > Furnace Autosampler dialog in the WinLab32 software.
To install the sample tray and cover:
1. Grip the hub of the sample tray and lower it onto the drive spindle.
2. Rotate the tray gently until the key on the hub engages into the keyway on the
drive spindle. There is a notch in the outer ring of the sample locations to mark
the position of the key.