Pazzles Mini Creative Cutter User Manual Download Page 28

Page: 28 / 140

Chapter 2

Installation and Setup

Creative Cutter MINI

•

If oil from your hands gets on the mat, try to remove it with a lint roller or masking tape. How-

ever, if your mat is too tacky, this can help alleviate some of the stickyness.

•

Scrape bits of paper off the mat, try to remove it by patting rolled-up packing tape over the

mat, or by using an old credit card.

•

Do not cut high fiber papers that can leave fibers on the mat.

•

Since the protective cover for the mat is plastic, it will attract dust. When removin the plastic

covers, place it in a dust-free area. If the protective cover does attract dust, wipe it off prior to
recovering the mat for storage.

Summary of Contents for Mini Creative Cutter













































































































































Search results

Summary of Contents for Mini Creative Cutter

Reviews:

Related manuals for Mini Creative Cutter

Brands by name

Popular brands

Pazzles Mini Creative Cutter, User Manual

Search results

Summary of Contents for Mini Creative Cutter

Reviews:

Related manuals for Mini Creative Cutter

Brands by name

Popular brands