Pazzles Mini Creative Cutter, User Manual, Page: 56 / 140

Chapter 4 Creative Cutter Tutorials
48 Creative Cutter MINI
Cut your Title
Step 1: Select the Inside and Outside Part of the Word
TIP: Before typed text is welded, you can select it by clicking anywhere on the word. All parts
inside and out will be grouped together with one click. After you weld the word, the inside and
outside parts are separate and you must select both the inside and outside parts. Be sure to select
all the parts. If you don’t, you will leave pieces behind when you move the word.
1 To select both the inside and outside parts
of your word, click on the Select Elements tool.
2 Click a spot on the workspace that is above and to the left of the word. Hold down the
mouse button as you drag the mouse to the right and down to create a box around the entire
word.
TIP: Drag a BIG box! You must drag a box big enough to fit the entire word inside. Otherwise
you may not get all the parts.
Figure 68
3
Position the word:
To move: Move the mouse over
the word until the arrow
changes into a cross symbol.
Place the word approximately
1" down from the top and 1" in
from the left side of he page.
Click the mouse button, hold
button down, and drag the word
to the proper location on the
page.
Figure 69
Release the mouse button and little
boxes will appear around the word to
indicate it is selected. Tip: Think of this as throwing a net
around the word to catch all the parts.
Click here
X
move symbol