![background image](http://html1.mh-extra.com/html/patton-electronics/iplink-series/iplink-series_software-configuration-manual_4039064223.webp)
Access control list configuration task list
223
IPLink Software Configuration Guide
19 • Access control list configuration
Mode: Interface
Where the syntax is:
Example:
Debugging access control list profiles
The following example shows how to enable debugging for incoming traffic of access control lists on interface
wan. On level 7 all debug output is shown.
IPLink(cfg)#context ip router
IPLink(cfg-ip)[router]#interface wan
IPLink(cfg-if)[wan]#debug acl in 7
The following example enables the debug monitor for access control lists globally.
IPLink#debug acl
The following example disables the debug monitor for access control lists globally.
IPLink#no debug acl
Step
Command
Purpose
1
node(cfg)#context ip router
Selects the IP router context
2
node(ctx-ip)[router]#interface
if-name
Selects IP interface
if-name
for which access
control list profile shall be debugged
3
node(if-ip)[
if-name
]#debug acl {in | out} [level]
Enables access control list debug monitor
with a certain debug level for the selected
interface
if-name
Keyword
Meaning
if-name
The name of the IP interface to which an access control list profile gets bound
level
The detail level. Level 0 disables all debug output, level 7 shows all debug output.
in
Specifies that the settings for incoming packets are to be changed.
out
Specifies that the settings for outgoing packets are to be changed.