19
IPLink Software Configuration Guide
About this guide
•
Chapter 3,
"Command line interface (CLI)"
on page 33 gives an overview of the CLI and the basic features
that allow you to navigate the CLI and edit commands effectively.
•
Chapter 4,
"Accessing the CLI"
on page 38 describes the procedures for entering IPLink software com-
mands via the command line interface (CLI), to obtain help, to change operator mode and to terminate a
session.
•
Chapter 5,
"Establishing basic IP connectivity"
on page 50 explains how to establish network-based con-
nections to and from your IPLink by using IP interfaces and Ethernet ports.
•
Chapter 6,
"System image handling"
on page 57 describes how to load and maintain system images and
driver software.
•
Chapter 7,
"Configuration file handling"
on page 71 describes how to upload and download configuration
files from and to an IPLink devices.
•
Chapter 8,
"Basic system management"
on page 87 describes parameters that report basic system informa-
tion to the operator or administrator, and their configuration.
•
Chapter 9,
"RADIUS Client Configuration"
on page 99 provides an overview of the authentication, autho-
rization, and accounting (AAA) component in IPLink software and describes how to configure the
RADIUS client, a subpart of the AAA component.
•
Chapter 10,
"IP context overview"
on page 110 outlines IPLink software
Internet protocol
(IP) context,
together with its related components.
•
Chapter 11,
"IP interface configuration"
on page 117 provides a general overview of IPLink interfaces and
describes the tasks involved in their configuration.
•
Chapter 12,
"NAT/NAPT configuration"
on page 128 provides a general overview of the network address
port translation and describes the tasks involved in its configuration.
•
Chapter 13,
"Ethernet port configuration"
on page 137 provides an overview of Ethernet ports and
describes the tasks involved in their configuration through IPLink software.
•
Chapter 14,
"Link scheduler configuration"
on page 148 describes how to use and configure IPLink soft-
ware
quality of service
(QoS) features.
•
Chapter 15,
"Serial port configuration"
on page 167 provides an overview of the serial port and describes
the tasks involved in its configuration through IPLink software.
•
Chapter 16,
"T1/E1 port configuration"
on page 185 provides an overview of the T1/E1 ports, their char-
acteristics and the tasks involved in the configuration.
•
Chapter 17,
"Basic IP routing configuration"
on page 195 provides an overview of IP routing and describes
the tasks involved in configuring static IP routing in IPLink software.
•
Chapter 18,
"RIP configuration"
on page 201 provides an overview of the
routing information protocol
(RIP) and describes the tasks involved in configuring RIP features within IPLink software.
•
Chapter 19,
"Access control list configuration"
on page 211 provides an overview of IP access control lists
and describes the tasks involved in their configuration through IPLink software.
•
Chapter 20,
"SNMP configuration"
on page 225 provides overview information about the
simple network
management protocol
(SNMP) and describes the tasks used to configure those of its features supported
by IPLink software.