Using the AdventNet SNMP utilities
235
IPLink Software Configuration Guide
20 • SNMP configuration
•
The same can be done through clicking the MibBrowser settings button on the toolbar. See
figure 36
.
Figure 36. AdventNet MibBrowser Settings Button on the Toolbar
By default the MIB description display and the result display are visible in the MibBrowser.
Using the TrapViewer
TrapViewer is a graphical tool to view the traps received from one or more SNMP agents running on an
IPLink device. The TrapViewer can listen to one or more port at a time and the traps can be sent from any
host. IPLink device send their traps to the SNMP standard port 162.
Invoke the TrapViewer through the usage of the MibBrowser. To get to know more about the MibBrowser refer
to section
“Using the MibBrowser”
on page 234.
Figure 37
is a screen shot of the TrapViewer.
Figure 37. AdventNet TrapViewer displaying received traps
The TrapViewer has a table that displays the trap information, the common parameters text fields where neces-
sary information has to be entered and other options such as Start, Stop, Trap Details, Delete Trap and
ParserEditor.
Follow these steps to work on the Trap Viewer and to know more about the available options:
•
By default the value in the Port text field is 162. Enter the desired port in the field on which the viewer will
listen.