manualshive.com logo in svg

Patton electronics IPLink Series, Software Configuration Manual, Page: 228 / 331

Share
Download
Patton electronics IPLink Series Software Configuration Manual Download Page 228

Identification of the IPLink devices via SNMP

228

IPLink Software Configuration Guide 

20 • SNMP configuration

Identification of the IPLink devices via SNMP

All IPLink devices have assigned sysObjectID (.iso.org.dod.internet.mgmt.mib-2.system.sysObjectID) num-
bers (see 

table 11

).

According to 

table 11

, an SNMP get request to .iso.org.dod.internet.mgmt.mib-2.system.sysObjectID of an 

IPLink 2802 device reads out a numeric OID of 1.3.6.1.4.1. 1768.2.2.8.1, which represents an IPLink 2802. 
The mapping of the sysObjectID to each of the IPLink model is realized with the IPLink product identifica-
tion MIB.

SNMP tools

Patton recommends the AdventNet MibBrowser, TrapViewer and other SNMP tools. Check the AdventNet 
Web server at http://www.adventnet.com for latest releases. 

Refer to section 

“Using the AdventNet SNMP utilities” 

on page 234 for more detailed information on how to 

use these tools together with the IPLink’s.

SNMP configuration task list

To configure SNMP, perform the tasks described in the following sections. The tasks in the first three sections 
are required; the tasks in the remaining sections are optional, but might be required for your application.

•

Setting basic system information (required) (see 

page 229

)

•

Setting access community information (required) (see 

page 231

)

•

Setting allowed host information (required) (see 

page 232

)

•

Specifying the default SNMP trap target (optional) (see 

page 232

)

•

Displaying SNMP related information (optional) (see 

page 233

)

Table 11. IPLink Models and their Unique sysObjectID 

IPLink Model

SysObjectID

2802

.iso.org.dod.internet.private.enterprises.patton.products.sn2802 
1.3.6.1.4.1.1768.2.2.8.1

2805

.iso.org.dod.internet.private.enterprises.patton.products.sn2805 
1.3.6.1.4.1.1768.2.2.8.2

2821

.iso.org.dod.internet.private.enterprises.patton.products.sn2821 
1.3.6.1.4.1.1768.2.2.8.3

2835

.iso.org.dod.internet.private.enterprises.patton.products.sn2835 
1.3.6.1.4.1.1768.2.2.8.4

The SNMP agent running in IPLink software is SNMP version 1 
(SNMPv1) compliant. SNMP version 2 (SNMPv2) and SNMP 
version 3 (SNMPv3) are not currently supported.

IMPORTANT

Summary of Contents for IPLink Series












































































































































































































































































































































Reviews:

No comments