Summary
322
IPLink Software Configuration Guide
C • Command summary
rip default-route-value <default-route-value>
[no] use profile napt <profile>
[no] napt-inside
[no] tcp adjust-mss rx {mtu | ( <mss> ) }
[no] tcp adjust-mss tx {mtu | ( <mss> ) }
exit
dyndns
dyndns
dyndns
[no] hostname <host> [wildcard ]
[no] authentication <user> <passwd>
[no] service {custom | dynamic | static }
[no] observe <ifname>
[no] mail-exchanger <host> [backup-mx ]
exit
exit
subscriber_ppp
subscriber_ppp
[no] subscriber ppp <subscriber_ppp_name>
dial [{in|out} ]
[no] authentication chap
[no] authentication pap
[no] authentication chap pap
[no] identification outbound <id> [password <password> ]
[no] identification inbound <id> [password <password> ]
[no] timeout absolute <timeout>
[no] timeout idle <timeout>
[no] timeout on-timer
[no] max-sessions <max-sessions>
[no] ipaddress <address>
[no] callback [mandatory ] [destination {any|some|fix} ]
[no] callback dial-string <dial-string>
[no] bind interface <interface> [router ]
exit
port_ethernet
port_ethernet
port ethernet <slot> <port>
medium {auto | ( {10|100} {half|full} ) }
encapsulation {ip|pppoe|multi}
[no] bind interface <interface> [router ]
[no] shutdown
pppoe
pppoe
pppoe_session
[no] session <session>
[no] service <service>