Accessing the IPLink software CLI task list
49
IPLink Software Configuration Guide
4 • Accessing the CLI
Ending a Telnet or console port session
Use the
logout
command in the operator or administration execution mode to end a Telnet or console port ses-
sion. To confirm the
logout
command, you must enter
yes
on the dialog line as shown in the example below.
Mode:
Operator execution
Example:
End a Telnet or console port session
The following example shows how to terminate a session from the administrator execution configuration
mode.
IPLink>logout
Press 'yes' to logout, 'no' to cancel :
After confirming the dialog with “yes”, the Telnet session to the IPLink is terminated and the Telnet applica-
tion window on your host closes.
Note
Using the command
exit
in the operator execution mode also terminates a
Telnet or console port session, but without any confirmation dialog.
Hidden commands in .cfg configuration files
The command
cli config defaults
turns it on,
no cli config defaults
turns it off. It is turned off by default.
When enabled, commands that are normally hidden will be displayed. Typically these commands comprise
well-known standard default values, which is why they are hidden by default to reduce the clutter in a dis-
played configuration file.
Step
Command
Purpose
1
node>logout
Terminates the session after a confirmation by the user.