Summary
319
IPLink Software Configuration Guide
C • Command summary
problem|port-unreachable|precedence-unreachable|protocol-
unreachable|reassembly-timeout|redirect|router-advertisement|router-
solicitation|source-quench|source-route-failed|time-exceeded|timestamp-
reply|timestamp-request|traceroute|ttl-exceeded|unreachable} type <icmp-
type> [code <icmp-code> ] ] ) } [dscp <dscp-value> [mask {1|3|7|15|31} ]
(precedence {{critical|flash|flash-
override|immediate|internet|network|priority|routine} | <precedence-
value> } ) [tos {{max-reliability|max-throughput|min-delay|min-monetary-
cost|normal} | <tos-value> } ] ] [{cos | traffic-class } {<traffic-class1>
| <new-traffic-class1> } {cos-rtp | rtp-traffic-class } {<traffic-class1>
| <new-traffic-class1> } {<traffic-class2> | <new-traffic-class2> } ]
[ipsec-policy <policy> ] ) }
exit
profile_service-policy
profile_service-policy
[no] profile service-policy <arbiter-name>
mode {shaper | wfq | burst-shaper | burst-wfq }
[no] rate-limit <rate_limit>
(header-length <header_length> )
atm-modem
(voice-margin <voice_margin> )
[no] map packet-size {({routed-voice | routed-voice-encrypted } traffic-
class <traffic-class> ) | (<lower-size> <upper-size> traffic-class
<traffic-class> ) }
[no] queue-limit <queue_limit>
[no] set ip dscp <tag_dscp>
[no] set ip precedence <tag_prec>
[no] set ip tos <tag_tos>
[no] set layer2 cos <tag_l2cos>
[no] debug queue statistics [detail <debug_queue> ]
profile_napt
profile_napt
[no] profile napt <profile>
[no] range <local_ip1> <local_ip2> <global_ip> [<global_ip2> ]
[no] static <local_ip1> <global_ip>
[no] static {ah|esp|gre|ipv6} <local_ip1> [<global_ip> ]
[no] dmz-host <local_ip1> [<global_ip> ]
tcp-port-range <start> <end>
[no] preserve-tcp-ports
udp-port-range <start> <end>
[no] preserve-udp-ports
udp-handling {full-cone|address-restricted-cone|port-restricted-
cone|symmetric}
[no] static {udp|tcp} <local_ip1> <local_port> [<global_ip> ] [<global_port>
]
[no] static {udp|tcp} <local_port> <local_ip1>
exit
profile_ppp
profile_ppp
[no] profile ppp <profile_ppp_name>