Basic system management configuration task list
94
IPLink Software Configuration Guide
8 • Basic system management
Mode:
Configure
Example:
Defining the desired CLI version
The following example shows how to determine the running CLI version and define CLI version 2.10 for your
device, if you start from the configuration mode.
IPLink(cfg)#show version cli
CLI version : 3.00
IPLink(cfg)#cli version 2.10
Restarting the system
In case the IPLink has to be restarted, the
reload
command must be used. The reload command includes a
two-dialog, where the user is allowed to store any unsaved configuration data and finally confirms the
system restart.
The execution command
reload
has been enhanced with the following options:
•
graceful
—reloads the system only if no voice calls are ongoing. If there are voice calls, the system waits until
they all are closed to reload.
•
forced
—reloads the system without prompting for confirmation or for saving the running-configuration
(no need to type yes or no). The question whether to save the running-configuration is automatically
answered with no, the question whether to reload or not with yes.
Mode: Administrator execution
Example:
Restarting the system
The following example shows how to restart the currently running system, if you start from the administrator
execution mode.
IPLink#reload
System configuration has been changed.
Press 'yes' to store, 'no' to drop changes : yes
Press 'yes' to restart, 'no' to cancel : yes
The system is going down
Step
Command
Purpose
1
node(cfg)#show version cli
Displays the currently running CLI version
2
node(cfg)#cli version
version.revision
Selects the active CLI version in the form version.revi-
sion
Restarting the system interrupts running data transfers and all
voice calls established via the IPLink that is to be restarted.
Step
Command
Purpose
1
node#reload
Restarts the system
IMPORTANT