Patton electronics IPLink Series Software Configuration Manual Download Page 28 | Manualshive

Page: 28 / 331

Patton electronics IPLink Series Software Configuration Manual Download Page 28

IPLink Software management center tools

28

IPLink Software Configuration Guide

1 • System overview

•

The SNMP agent and MIB, with an emphasis on inventory and alarm management for integration in a
third-party Network Management System (NMS)

With the aid of configuration files and TFTP up and downloads, the IPLink devices can also be managed
offline using standard text editors and file systems.

A number of host-based management applications are available to facilitate generating, editing, and maintain-
ing configuration files. Tools are also available for integrating IPLink management into standard network man-
agement platforms such as HP OpenView.

«
...
26
27
28
29
30
...
»

Summary of Contents for IPLink Series












































































































































































































































































































































Reviews:

No comments