Link scheduler configuration task list
165
IPLink Software Configuration Guide
14 • Link scheduler configuration
IPLink(ctx-ip)[router]#interface wan
IPLink(if-ip)[wan]#use profile service-policy Voice_Prio out
Displaying link arbitration status
The
show service-policy
command displays link arbitration status. This command supports the optional
argument
interface
that select a certain IP interface. This command is available in the operator mode.
Mode: Operator execution
Example:
Displaying link arbitration status
The following example shows how to display link arbitration status information.
IPLink>show service-policy
available queue statistics
--------------------------
default
- packets in queue: 10
Displaying link scheduling profile information
The
show profile service-policy
command displays link scheduling profile information of an existing ser-
vice-policy profile. This command is only available in the administrator mode.
Mode: Administrator execution
Example:
Displaying link scheduling profile information
The following example shows how to display link scheduling profile information of an existing service-policy
profile VoIP_Layer2_CoS.
IPLink#show profile service-policy VoIP_Layer2_CoS
VoIP_Layer2_CoS
default (mark layer 2 cos -1)
Enable statistics gathering
Using the
debug queue statistics
commands enables statistic gathering of link scheduler operations.
Step
Command
Purpose
1
node>show service-policy {interface
name
}
Displays the link arbitration status
Step
Command
Purpose
1
node#show profile service-policy
name
Displays link scheduling profile information of the
service-policy profile
name