manualshive.com logo in svg

Patton electronics IPLink Series, Software Configuration Manual, Page: 308 / 331

Share
Download
Patton electronics IPLink Series Software Configuration Manual Download Page 308

IPLink software architecture terms and definitions

308

IPLink Software Configuration Guide 

A • Terms and definitions

Routing Engine

In IPLink software the routing engine handles the basic IP routing.

Running Configuration

The currently running configuration (running-config) for IPLink software, 
which is executed from the volatile memory (system:) on the IPLink.

IPLink software

IPLink software is the application software running on the IPLink hardware 
platforms. The IPLink software is available in several releases that in gen-
eral support all currently available IPLink models.

Startup Configuration

The startup configuration is stored in the persistent memory (nvram:) and is 
always copied for execution to the running configuration in the volatile 
memory (system:) after a system start-up.

System Image

A collective term for application images and interface card driver soft-
ware, excluding configuration files.

System Memory

The volatile memory, that includes the system: region, holding the running-
config for the IPLink software during operation of an IPLink.

system:

A region in the volatile memory of an IPLink. See also 

system memory

.

TFTP Server

A central server used for configuration up- and download, download of 
application and interface card driver software, that is accessed using 
TFTP.

tftp:

Identification of a remote storing location used for configuration up- and 
download, download of application and interface card driver software, 
that is accessed using TFTP.

Term or Definition

Meaning

Summary of Contents for IPLink Series












































































































































































































































































































































Reviews:

No comments