Panasonic PT-SRZ34KC, Operating Instructions Manual

Page: 276 / 322

Chapter 5 Operations
—
Updating the fi rmware
2 76 - ENGLISH
10) Confirm the firmware version.
f
Update is co m pleted w hen the light source indicator <
光源
> and the te m perature indicator <
温度
> stop
blinking and turn off.
f
Turn on the po w er of the projector and con fi r m the fi r mw are v ersion in the [STATUS] screen.
Attention
f
Do not disconnect the m ain po w er supply of the projector w hile updating.
Note
f
In follo w ing cases, turn the po w er of the projector off and on and perfor m the update fro m the beginning.
g
When the update does not co m plete after 6 0 m inutes or m ore ha v e elapsed
g
When the po w er of the projector has turned off due to po w er outage, etc., during the update
Operating the information monitor to update the fi rmware
Re w riting of the fi r mw are can be perfor m ed by operating the infor m ation m onitor e v en if the projector is in the
standby m ode.
1) Insert the USB memory with the firmware data saved into the <USB> terminal of the projector.
2) Confirm that the projector is in the standby mode.
3) Press the <INFO> button on the control panel.
f
The top m enu screen is displayed.
4) Press
as
to select [SETUP].
5) Press the <
执行
> button.
f
The sub- m enu ite m is displayed.
6) Press
as
to select [FIRM.UPDATE].
7) Press the <
执行
> button.
f
The security pass w ord entry screen is displayed.
8) Enter a security password and press the <
执行
> button.
f
The fi r mw are update execution con fi r m ation screen is displayed.
f
The fi r mw are v ersion after the update can be con fi r m ed by pressing
w
w hile the execution con fi r m ation
screen is displayed.
g
Press
as
to s w itch the display bet w een the m ain v ersion and the net w ork v ersion.
g
Press
q
w hile the fi r mw are v ersion is displayed to return to the execution con fi r m ation screen.
9) Press the <
执行
> button.
f
Update is started.
f
Rough progress can be con fi r m ed in the infor m ation m onitor once the update is started.
f
The light source indicator <
光源
> and the te m perature indicator <
温度
> blink in red alternately w hile
updating.
f
Update is co m pleted once [FIRM.UPDATE C OMPLETE] is displayed in the infor m ation m onitor.
Attention
f
Do not disconnect the m ain po w er supply of the projector w hile updating.
Note
f
In follo w ing cases, turn the po w er of the projector off and on and perfor m the update fro m the beginning.
g
When the update does not co m plete after 6 0 m inutes or m ore ha v e elapsed
g
When the po w er of the projector has turned off due to po w er outage, etc., during the update