Chapter 4
Settings
—
[PROJECTOR SETUP] menu
ENGLISH -
1
9
3
6) Press
qw
to switch the item.
f
The ite
m
s
w
ill s
w
itch each ti
m
e you press the button.
[OFF]
Select this ite
m
w
hen the contrast synchronization function is not used.
[ON]
Select this ite
m
w
hen the contrast synchronization function is used.
Note
f
The contrast synchronization function
w
ill operate
w
hen all of the follo
w
ing conditions are ful
fi
lled.
g
All the projectors to be linked are connected in a loop
w
ith the daisy chain connection.
(
Maxi
m
u
m
6
4
projectors
)
g
[MODE] on only one projector that is linked is set to [MAIN], and [MODE] on all other projectors are set to [SUB].
g
[
C
ONTRAST SYN
C
] on the projectors to perfor
m
the contrast synchronization is set to [ON].
f
It is possible to set [
C
ONTRAST SYN
C
] to [OFF] for the projectors that are linked but not to synchronize.
Setting the shutter synchronization function
1) Press
as
to select [MULTI PROJECTOR SYNC].
2) Press the <
执行
> button.
f
The
[MULTI PROJECTOR SYNC]
screen is displayed.
3) Press
as
to select [MODE].
4) Press
qw
to switch the item.
f
The ite
m
s
w
ill s
w
itch each ti
m
e you press the button.
[OFF]
Select this ite
m
w
hen the contrast synchronization function and the shutter synchronization function
are not used.
[MAIN]
Select this ite
m
w
hen the contrast synchronization function or the shutter synchronization function is
used.
Set this ite
m
only on one of the linked projectors that beco
m
es the synchronization source of the
shutter operation.
[SUB]
Select this ite
m
w
hen the contrast synchronization function or the shutter synchronization function is
used.
Set this ite
m
in all the linked projectors excluding the projector set as the [MAIN].
f
When anything other than [OFF] is selected, the diagnostic result is displayed in [LINK STATUS], indicating
if all the projectors including the projectors targeted for synchronization are correctly connected, and if
[MODE] is correctly set.
[LINKED]
All the projectors are correctly connected, and correctly set. They are in the condition that the contrast
synchronization function or the shutter synchronization function can be used.
[NO LINK]
The projectors are not correctly connected, or not correctly set.
C
heck the cable connection status
and the projector setting for each projector that is linked.
5) Press
as
to select [SHUTTER SYNC].
6) Press
qw
to switch the item.
f
The ite
m
s
w
ill s
w
itch each ti
m
e you press the button.
[OFF]
Select this ite
m
w
hen the shutter synchronization function is not used.
[ON]
Select this ite
m
w
hen the shutter synchronization function is used.
Note
f
The shutter synchronization function
w
ill operate
w
hen all of the follo
w
ing conditions are ful
fi
lled.
g
All the projectors to be linked are connected in a loop
w
ith the daisy chain connection.
(
Maxi
m
u
m
6
4
projectors
)
g
[MODE] on only one projector that is linked is set to [MAIN], and [MODE] on all other projectors are set to [SUB].
g
[SHUTTER SYN
C
] on the projectors to perfor
m
the shutter synchronization is set to [ON].
f
It is possible to set [SHUTTER SYN
C
] to [OFF] for the projectors that are linked but not to synchronize.
f
The shutter operation by the shutter synchronization function
w
ill follo
w
the setting of the [DISPLAY OPTION]
m
enu
→
[SHUTTER
SETTING] on the projector that [MODE] is set to [MAIN].
f
When the input signal to each linked projector is not synchronized, the ti
m
ing of the shutter operation bet
w
een the projectors
m
ay shift up to
1
fra
m
e
w
hile using the shutter synchronization function.
f
The shutter function of the projector
w
ith [MODE] set to [SUB] can be operated indi
v
idually. The shutter operation at this ti
m
e
w
ill follo
w
the
setting of the [DISPLAY OPTION]
m
enu
→
[SHUTTER SETTING] set in that projector.