Panasonic PT-SRZ34KC, Operating Instructions Manual

Page: 132 / 322

Chapter 4 Settings
—
[DISPLAY OPTION] menu
132 - ENGLISH
2) Press
qw
to select [MEASURED].
3) Press the <
执行
> button.
f
The [MEASURED MODE] screen is displayed.
4) Press
as
to select [MEASURED DATA].
f
The adjust m ent condition can be reset by selecting [RESET]. For details regarding [RESET], refer to
“Resetting the adjust m ent condition of the color m atching ” (
x
page 132) .
5) Press the <
执行
> button.
f
The [MEASURED DATA] screen is displayed.
6) Measure the current luminance (Y) and the chromaticity coordinates (x, y) using the colorimeter.
7) Press
as
to select a color, and press
qw
to adjust the setting.
f
Set [AUTO TESTPATTERN] to [ON] to display a test pattern of selected colors.
8) Once all the input is completed, press the <
菜单
> button.
f
The [MEASURED MODE] screen is displayed.
f
When [MEASURED] is selected in Step 2) , proceed to Step 9) and enter the coordinates of desired colors.
9) Press
as
to select [TARGET DATA].
10) Press the <
执行
> button.
f
The
[TARGET DATA]
screen is displayed.
11) Press
as
to select a color and press
qw
to input coordinates for desired colors.
f
By setting [AUTO TESTPATTERN] to [ON], the test pattern for the selected color is displayed.
12) Once all the input is completed, press the <
菜单
> button.
Note
f
C olors are not displayed properly w hen target data is a color outside the region of this projector.
f
Set the [AUTO TESTPATTERN] to [ON] to auto m atically display a test pattern for use in adjusting the selected adjust m ent colors.
f
[AUTO TESTPATTERN] settings change together w ith the [AUTO TESTPATTERN] of [EDGE BLENDING].
f
Before using a colori m eter or si m ilar instru m ent to m easure m easure m ent data, set [PI C TURE MODE] to [DYNAMI C ].
f
A difference in the color coordinates of target data and m easure m ent v alues obtained fro m an instru m ent m ay occur for certain instru m ents
and m easure m ent en v iron m ents used.
Resetting the adjustment condition of the color matching
Reset all the adjust m ent ite m s of the color m atching adjusted in [ 3C OLORS], [7 C OLORS], and [MEASURED].
1) Press
as
to select [COLOR MATCHING].
2) Press
qw
to select [3COLORS], [7COLORS], or [MEASURED].
3) Press the <
执行
> button.
f
The [3COLORS] , [7COLORS] , or [MEASURED MODE] screen is displayed.
4) Press
as
to select [RESET].
5) Press the <
执行
> button.
f
The con fi r m ation screen is displayed.
6) Press
asqw
to select [RESET].
7) Press
qw
to switch the item.
f
The ite m s w ill s w itch each ti m e you press the button.
[PICTURE MODE]
Sets all the adjust m ent ite m s of the color m atching to the color v alue of the factory default for the
currently selected picture m ode.
Set the picture m ode in the [PI C TURE] m enu → [PI C TURE MODE].
[REC709]
Sets all the adjust m ent ite m s for color m atching to “ITU-R Reco mm endation BT.7 0 9 ” , w hich is the
color standard for the high- v ision broadcasting.
[NATIVE] Sets all the adjust m ent ite m s for color m atching to uncorrected v alue.