Chapter 5
Operations
—
Using the data cloning function
ENGLISH -
2
67
7) Press the <
执行
> button.
f
The
[LAN DATA CLONING]
screen is displayed.
8) Press
as
to select [SELECT PROJECTOR].
9) Press the <
执行
> button.
f
The projectors in the sa
m
e subnet are displayed as a list.
10) Press
as
to select the copy destination projector.
11) Press the <
执行
> button.
f
To select
m
ultiple projectors, repeat Steps
10)
to
11)
.
12) Press the <
默认
> button on the remote control.
f
The con
fi
r
m
ation screen is displayed.
13) Press
qw
to select [OK], and press the <
执行
> button.
f
C
opy of the data bet
w
een the projectors is started.
Once the copy is co
m
pleted, results are displayed as a list in the
[LAN DATA CLONING]
screen.
Meanings of the
m
arks displayed in the list are as follo
w
s.
g
Green: Data copy has succeeded.
g
Red: Data copy has failed.
C
on
fi
r
m
the connection of the LAN cable and po
w
er status of the copy
destination projector.
f
Data is copied to the copy destination projector in the standby
m
ode.
If the copy destination projector is in the projection
m
ode, the LAN data cloning request
m
essage is
displayed, and then the copy destination projector auto
m
atically shifts to the standby
m
ode to start copy of
data.
14) Turn on the copy destination projector.
f
The copied content is re
fl
ected to the projector.
Note
f
The security pass
w
ord is the pass
w
ord set in the [SE
C
URITY]
m
enu
→
[SE
C
URITY PASSWORD
C
HANGE].
Initial pass
w
ord of the factory default setting:
awsqawsq
f
The light source indicator <
光源
> and the te
m
perature indicator <
温度
> of the copy destination projector blink
w
hile copying the data.
C
on
fi
r
m
that the blinking of the indicators stops, and then turn on the projector.
Setting [WRITE PROTECT]
Set if the copy of data
v
ia LAN is per
m
itted or not.
1) Press
as
to select [DATA CLONING] on the copy destination projector.
2) Press the <
执行
> button.
f
The
[SECURITY PASSWORD]
screen is displayed.
3) Enter a security password and press the <
执行
> button.
f
The
[DATA CLONING]
screen is displayed.
4) Press
as
to select [LAN].
5) Press the <
执行
> button.
f
The
[LAN DATA CLONING]
screen is displayed.
6) Press
as
to select [WRITE PROTECT].
7) Press
qw
to switch the item.
f
The ite
m
s
w
ill s
w
itch each ti
m
e you press the button.
[OFF]
Per
m
its operations of [DATA
C
LONING] fro
m
another projector
v
ia LAN.
[ON]
Does not per
m
it the operations of [DATA
C
LONING] fro
m
another projector
v
ia LAN.
f
Data copy
w
ill not be possible
w
hen [ON] is set. When it is not necessary to copy data, set [ON] so
that the data is not changed by
m
istake.
