Panasonic PT-SRZ34KC, Operating Instructions Manual

Page: 134 / 322

Chapter 4 Settings
—
[DISPLAY OPTION] menu
134 - ENGLISH
[AUTO SIGNAL]
Set w hether to execute auto m atic setup of signals auto m atically.
The screen display position or signal le v el can be adjusted auto m atically w ithout pressing the <
自动设置
> button
on the re m ote control on each occasion if you input unregistered signals frequently at m eetings, etc.
1) Press
as
to select [AUTO SIGNAL].
2) Press
qw
to switch the item.
f
The ite m s w ill s w itch each ti m e you press the button.
[OFF] Sets the auto signal function to off.
[ON]
Executes auto m atic setup auto m atically w hen i m ages are changed to unregistered signals during
projection.
[AUTO SETUP]
Set the ite m s to auto m atically adjust w hile auto m atic setup function is executed. Also, the auto m atic setup can be
executed.
Adjusting position automatically
1) Press
as
to select [AUTO SETUP].
2) Press the <
执行
> button.
f
The [AUTO SETUP] screen is displayed.
3) Press
as
to select [POSITION ADJUST].
4) Press
qw
to switch the item.
[ON] Adjust the screen position and size w hen auto m atic setup is executed.
[OFF] Does not perfor m auto m atic adjust m ent.
Adjusting signal level automatically
1) Press
as
to select [AUTO SETUP].
2) Press the <
执行
> button.
f
The [AUTO SETUP] screen is displayed.
3) Press
as
to select [SIGNAL LEVEL ADJUST].
4) Press
qw
to switch the item.
[OFF]
Does not perfor m auto m atic adjust m ent.
[ON]
Adjusts black le v el ( the [PI C TURE] m enu → [BRIGHTNESS] ) and w hite le v el ( the [PI C TURE] m enu
→ [ C ONTRAST] ) w hen auto m atic setup is executed.
Note
f
[SIGNAL LEVEL ADJUST] m ay not function properly unless a still i m age containing clear blacks and w hites is input.
f
[SIGNAL LEVEL ADJUST] does not operate in follo w ing cases.
g
When a v ideo signal of 10 8 0/120 p is input
g
When 4 K v ideo signal is input w hile the [POSITION] m enu → [ASPE C T] is set to [THROUGH]
Executing the automatic setup
1) Press
as
to select [AUTO SETUP].
2) Press the <
执行
> button.
f
The [AUTO SETUP] screen is displayed.
3) Press
as
to select [EXECUTE], and press the <
执行
> button.
f
The auto m atic setup is executed.