Chapter 4
Settings
—
[PICTURE] menu
104
- ENGLISH
[USER1]
Adjusts
w
hite balance as desired. Refer to “Adjusting desired
w
hite balance
”
(
x
page
104)
for
details.
[USER2]
[3200K] - [13000K]
Allo
w
s you to set in incre
m
ents of
100
K. Select so that i
m
ages beco
m
e natural.
Note
f
When [PI
C
TURE MODE]
(
x
page
102)
is set to [USER] or [DI
C
OM SIM.], [DEFAULT] cannot be selected.
f
When the [DISPLAY OPTION]
m
enu
→
[
C
OLOR MAT
C
HING] is set to anything other than [OFF], [
C
OLOR TEMPERATURE] is
fi
xed to
[USER
1
].
f
The color te
m
perature nu
m
erical
v
alues are guidelines.
Adjusting desired white balance
1) Press
as
to select [COLOR TEMPERATURE].
2) Press
qw
.
f
The
[COLOR TEMPERATURE]
indi
v
idual adjust
m
ent screen is displayed.
3) Press
qw
to select [USER1] or [USER2].
4) Press the <
执行
> button.
f
The
[COLOR TEMPERATURE]
screen is displayed.
5) Press
as
to select [WHITE BALANCE].
6) Press the <
执行
> button.
f
The
[WHITE BALANCE]
screen is displayed.
7) Press
as
to select [WHITE BALANCE HIGH] or [WHITE BALANCE LOW].
8) Press the <
执行
> button.
f
The
[WHITE BALANCE HIGH]
screen or the
[WHITE BALANCE LOW]
screen is displayed.
9) Press
as
to select [RED], [GREEN], or [BLUE].
10) Press
qw
to adjust the level.
Item
Operation
Adjustment
Range of adjustment
[RED]
Press
w
.
Deepens red.
[WHITE BALAN
C
E HIGH]:
0
- +
2
55
(
factory default is
+
2
55
)
[WHITE BALAN
C
E LOW]: -
12
7 - +
12
7
(
factory default is
0)
Press
q
.
Weakens red.
[GREEN]
Press
w
.
Deepens green.
Press
q
.
Weakens green.
[BLUE]
Press
w
.
Deepens blue.
Press
q
.
Weakens blue.
Note
f
Adjust [
C
OLOR TEMPERATURE] correctly. All colors
w
ill not be displayed properly unless adequate adjust
m
ent is
m
ade. If the adjust
m
ent
does not look suitable, you can press the <
默认
> button on the re
m
ote control to return the setting for the selected ite
m
only to the factory
default setting.
Adjusting desired white balance based on existing color temperature settings
1) Press
as
to select [COLOR TEMPERATURE].
2) Press
qw
.
f
The
[COLOR TEMPERATURE]
indi
v
idual adjust
m
ent screen is displayed.
3) Press
qw
to select anything other than [USER1] and [USER2].
4) Press the <
执行
> button.
f
The
[CHANGE TO *****]
screen is displayed.
5) Press
as
to select [USER1] or [USER2].
f
The status of the color te
m
perature changed is sa
v
ed to the selected ite
m
.
