Panasonic PT-SRZ34KC, Operating Instructions Manual

Page: 154 / 322

Chapter 4 Settings
—
[DISPLAY OPTION] menu
1 5 4 - ENGLISH
2) Press the <
执行
> button.
f
The
[SLOT
输入
]
screen is displayed.
3) Press
as
to select [SINGLE LINK SETTING] or [DUAL LINK SETTING], and press the <
执行
> button.
f
The [SINGLE LINK SETTING] screen or the [DUAL LINK SETTING] screen is displayed.
f
Proceed to Step
5)
w hen [DUAL LINK SETTING] is selected.
4) Press
as
to select [SDI1], [SDI2], [SDI3], or [SDI4], and press the <
执行
> button.
f
The [SINGLE LINK SETTING] screen for the selected ite m is displayed.
5) Press
as
to select [BIT DEPTH].
6) Press
qw
to switch the item.
f
The ite m s w ill s w itch each ti m e you press the button.
[AUTO] Auto m atically selects [ 12 -bit] or [ 10 -bit].
[12-bit] Fixes to [ 12 -bit].
[10-bit]
Fixes to [ 10 -bit].
Setting [SIGNAL LEVEL] in [SLOT
输入
] (SDI input)
1) Press
as
to select [SLOT
输入
].
2) Press the <
执行
> button.
f
The [SLOT
输入
] screen is displayed.
3) Press
as
to select [SINGLE LINK SETTING] or [DUAL LINK SETTING], and press the <
执行
> button.
f
The [SINGLE LINK SETTING] screen or the [DUAL LINK SETTING] screen is displayed.
f
Proceed to Step
5)
w hen [DUAL LINK SETTING] is selected.
4) Press
as
to select [SDI1], [SDI2], [SDI3], or [SDI4], and press the <
执行
> button.
f
The [SINGLE LINK SETTING] screen for the selected ite m is displayed.
5) Press
as
to select [SIGNAL LEVEL].
6) Press
qw
to switch the item.
f
The ite m s w ill s w itch each ti m e you press the button.
[64-940] Nor m ally use this setting.
[4-1019] Select this ite m w hen gray is displayed as black.
When the optional Interface Board for 12G-SDI Optical (Model No.: ET-MDNFB10) is installed
Set this ite m according to the input and output signals w hen this Interface Board is installed in the slot.
Setting [SDI OPT 1/2 OUT] in [SLOT
输入
] (OPT input)
Set w hether or not to output the signal fro m the <SDI OPT 1/2 OUT> ter m inal.
1) Press
as
to select [SLOT
输入
].
2) Press the <
执行
> button.
f
The [SLOT
输入
] screen is displayed.
3) Press
as
to select [SDI OPT 1/2 OUT].
4) Press
qw
to switch the item.
f
The ite m s w ill s w itch each ti m e you press the button.
[ENABLE]
Select this ite m w hen the input signal to the <SDI OPT 1 IN> ter m inal or the <SDI OPT 2 IN> ter m inal
that is selected for input is to be output fro m the <SDI OPT 1/2 OUT> ter m inal.
[DISABLE] Does not output the signal fro m the <SDI OPT 1/2 OUT> ter m inal.