Panasonic PT-SRZ34KC, Operating Instructions Manual

Page: 195 / 322

Chapter 4 Settings
—
[PROJECTOR SETUP] menu
ENGLISH - 1 95
Setting the response
1) Press
as
to select [RS-232C].
2) Press the <
执行
> button.
f
The [RS-232C] screen is displayed.
3) Press
as
to select [RESPONSE(ID ALL)].
4) Press
qw
to switch the item.
[ON] Returns the response w hen an ID is designated as ALL.
[OFF]
Does not return the response w hen an ID is designated as ALL.
5) Press
as
to select [GROUP].
6) Press
qw
to switch the item.
[A] - [Z]
C ontrols m ultiple projectors si m ultaneously by sending the ID of RS- 232C . You can set groups fro m
[A] to [ Z ]. The projector responds w hen the ID of RS- 232C m atches the setting.
7) Press
as
to select [RESPONSE(ID GROUP)].
8) Press
qw
to switch the item.
[ON] Returns the response w hen an ID is designated as GROUP.
[OFF] Does not return the response w hen an ID is designated as GROUP.
Note
f
When [INPUT SELE C T] is set to [DIGITAL LINK], co mm unication using that serial ter m inal is a v ailable only w hen the corresponding de v ice
( such as the optional DIGITAL LINK output supported de v ice ( Model No.: ET-YFB 100C)) is connected to the <DIGITAL LINK> ter m inal.
f
When [INPUT SELE C T] is set to [DIGITAL LINK], co mm unication speed for input is fi xed to 9 6 00 bps and the parity is fi xed to “NONE ” .
[REMOTE2 MODE]
You can set the <REMOTE 2
输入
> ter m inal.
1) Press
as
to select [REMOTE2 MODE].
2) Press
qw
to switch the item.
f
The ite m s w ill s w itch each ti m e you press the button.
[DEFAULT]
Uses pin assign m ent of the <REMOTE 2
输入
> ter m inal in standard setting. (
x
page 301)
[USER] C hanges the setting of the <REMOTE 2
输入
> ter m inal.
f
Proceed to Step 3) w hen [USER] is selected.
3) Press the <
执行
> button.
4) Press
as
to select one from [PIN2] to [PIN8], and press
qw
to switch the setting.
[FUNCTION BUTTON]
Set the function of the <
功能
> button on the re m ote control.
1) Press
as
to select [FUNCTION BUTTON].
2) Press the <
执行
> button.
f
The [FUNCTION BUTTON] screen is displayed.
3) Press
as
to select a function.
[DISABLE] Disables the <
功能
> button.
[SUB MEMORY]
Displays the sub m e m ory list. (
x
page 20 7 )