Panasonic KXF-193C, Operating Manual

Page: 85 / 206

Page 4-5
DA
T
A
MODIFICA
TION
4
Summary of Data Editing
When the printing
conditions data does
not need changing
4. Printing position data
Input the difference between the actual printing
position and the mask position.
When the mask
recognition or the batch
teaching has been
performed, the data are
set automatically.
When changing the printing condi-
tions data by using the library When modifying a part of the
printing conditions data
5. Printing conditions data (Library)
Load the data from the library.
5. Printing conditions data
Set the squeegee motion and the lift motion.
6. Cleaning data
Set the method of mask cleaning.
7. Printing counter
Set the solder dispense data.
8. Solder recognition data
Set the recognition counter and the solder recogni-
tion mode.
Up to 10 points can be set.
9. Data check
Finally, check if all the data are valid.
193C-E-EMA04-A01-02