Page 3-16
3-7
Board Transfer Test
After adjusting the board rail width and support pins, the board transfer test is carried out on the
board transfer screen. The board transfer end position blinks as Carry in
→
Load
→
Unload
→
Carry out and on the screen during board transferring.
NOTICE
Actually, the transfer test for whole line is carried out. This section describes the
board on the rear conveyor in the pre-station after the transfer test before the pre-
station.
1.
Turn ON the servo switch.
2.
Press
Product
config
.
• The production setting screen appears.
3.
Press PCB transfer .
• The board transfer screen appears.
193C-E-EMA03-A02-00
To the next page
OFF ( ) ON ( )
SERVO
193C-EOp-Pc-001
Summary of Contents for KXF-193C
