![background image](http://html.mh-extra.com/html/panasonic/kxf-193c/kxf-193c_operating-manual_275299060.webp)
Page 3-6
Positioning and Lift Transfer Rail Width Adjustment
3-2-1
Removing the Board Under Holder
Remove the board under holder for width adjustment at fast.
Check the X-Y table at the origin. If it is not there, return to the machine adjustment and carry out
the returning to origin.
1.
Turn off the servo switch.
2.
Remove the board under holder
block.
• The block (plate) is fixed with a magnet or
bolts. As for the block fixed with a magnet,
remove the block pulling it up. As for the block
fixed with bolts, take out bolts at fast to remove
the block.
• Also remove it in using the matrix plate or the
board pickup box and plate alike.
3.
Remove the board under holder plate
on the movable side.
• Remove two of M3 bolts under the plate.
193C-E-EMA03-A01-00
Board under holder
plate on movable side
OFF ( ) ON ( )
SERVO
18A5C2AA
1054C5AA
M3 bolts
To the next page
Summary of Contents for KXF-193C
