Panasonic KXF-193C, Operating Manual

Page: 83 / 206

Page 4-3
DA
T
A
MODIFICA
TION
4
Summary of Data Editing
PT specification
New production data of SP22 are created on PT Filer. SP22 Editor is used to edit these data so
that SP22 can use them to print boards.
The production data created and edited on the PT are downloaded to SP22, which uses this data
to print boards.
The recognition data such as board recognition are input on SP22 Editor. SP22 can correct the
margin of error between the input data value and the actual one by performing the recognition
teaching (production data teaching).
PT-less specification
Creating all new production data and modifying data are performed on the machine.
PT-less specification PT specification
PT Filer
• Create production data.
• Start Editor to edit the created data.
• Download the edited production data
(including each recognition data).
PT SP22 Editor
• Start it from Filer.
• Edit the production data of SP22. [Input each
detailed data (including each recognition
data).]
• Set function switches (including whether or
not to recognize).
SP22
• You can modify some production data (includ-
ing recognition teaching).
• Upload the modified (including recognition
teaching) production data.
• Print boards.
NOTICE
This chapter describes editing production data, as enclosed above by the dotted
line. For PT-less specification, the screens are different because operations are
performed on the machine.
Creating production data
Managing production data
Editing
Teaching and modifying
production data
193C-E-EMA04-A01-02
PT Filer
PT Editor
SP22
SP22