![background image](http://html.mh-extra.com/html/panasonic/kxf-193c/kxf-193c_operating-manual_275299064.webp)
Page 3-10
193C-E-EMA03-A01-00
M45EB
You will have serious injury if the machine is actuated.
TURN OFF THE POWER AND THE SERVO SWITCH BEFORE WORKING INSIDE
ACTIVE PART OF THE MACHINE FOR MACHINE SET-UP.
WARNING
Plate for fixed side
To the next page
Plate for movable side
Middle plate
3-3
Setting the Board Under Holder
The following three types are available for the board under holder, and the under holder set de-
pends upon each board type. Set the under holder for each board to use.
a) Board under holder pin (optional) ----------- The board is supported by pins. Use this for boards for
dual side mounting.
b) Board block --------------------------------------- The board is supported by the plate block. Use this for
boards for the single side mounting.
c) Board pickup box and plate (optional) ----- The board is supported by the vacuum pickup. Use
this for pin positioning, or such boards as ceramic and
thin card type.
a) Setting the board support pins (optional)
1.
Set necessary matrix plates for each
board size.
• The width of a plate is as follows.
Plate for fixed side --------------- 38 mm
Middle plate ------------------------ 40 mm
Plate for movable side ----------- 30 mm
• As for the nearest plates to the conveyor on the
movable and fixed sides, set each plate only
for that side.
Summary of Contents for KXF-193C
