Panasonic KXF-193C, Operating Manual

Page: 112 / 206

Page 4-32
Printing Conditions Data
4-9-5 Printing Counter
1. Paste Count
It decreases by one whenever one board is printed during an automatic operation. When it is “0”,
the automatic operation stops (Automatic operation - Residual solder check) or solder is dispensed
automatically (option, set in the function switch). Input the number as the paste count.
2. Solder dispense
Solder runout check
Remaining solder is checked by the chosen method, Sensor or Counter , and solder is dis-
pensed.
• When no solder is detected by the remaining
solder check during F R printing, solder is
dispensed automatically (set in the function
switch)
∗
When the solder autodispensing is OFF,
“Sensor” is disabled.
• The paste count decreases one by one when-
ever one board is printed during an automatic
operation. When it is “0”, the automatic opera-
tion stops or solder is dispensed automatically
(set in the function switch).
∗
When the solder autodispensing is OFF, be
sure to choose “Counter”.
Discharging time
Set the solder dispensing time for a solder autodispensing.
Sensor
(Option)
Counter
R
F
Solder dispensing
position
Printing head unit
Operator’s side
193C-E-EMA04-A03-00