Panasonic KXF-193C Operating Manual Download Page 124

Page: 124 / 206

Page 4-44

Form Printing

Preview

1. Top of page, End of page

2. Previous, Next

3. Reduce, Magnify

4. Print

5. Set Font

6. Set Form

The above contents are explained as follows.

1. Top of page, End of page

The first or end page of the pages to be printed out is displayed.

2. Previous, Next

The previous or next page from the current page is displayed.

3. Reduce, Magnify

The current page zooms in or out.

4. Print

After setting for printing, data are printed out to the printer.

5. Set Font

It is used to set the font, style and size.

6. Set Form

It is used to set the form size, paper supplying method, printing direction, margin and printer.

193C-E-EMA04-A03-00

Summary of Contents for KXF-193C















































































































































































































Search results

Summary of Contents for KXF-193C

Reviews:

Related manuals for KXF-193C

Brands by name

Popular brands

Panasonic KXF-193C, Operating Manual

Search results

Summary of Contents for KXF-193C

Reviews:

Related manuals for KXF-193C

Brands by name

Popular brands