Panasonic KXF-193C, Operating Manual

Page: 95 / 206

Page 4-15
DA
T
A
MODIFICA
TION
4
4-6 Board Positioning Data
4-6-1 Board Positioning Data
1. Y-axis direction clamp motion timing
Set the motion timing of the support and the clamp for when the board is fixed. The default is the
upper limit. (Except in the case that the other production board data is used)
Upper limit : After the support block has risen up to its upper limit and then the set delay time has
passed, the board begins to be clamped.
This is effective for the boards whose material is such as ceramic and iron.
Lower limit : After the board is clamped at its lower limit and then the set delay time has passed,
the support block begins to rise up.
This is effective for the boards whose material is such as glass-epoxy and paper
phenol.
2. Board stopper motion
Set the use of the board stopper at the time of positioning and the Y-direction position of the
stopper at the time of using the board stopper. The ON/OFF button can be toggled.
Board is clamped.
DelayTime
Board is
transported.
Board is stopped.
Support block
rises up.
Board is
transported.
Board is stopped. Board is clamped.
Support block
rises up.
DelayTime
Upper limit
193C-E-EMA04-A02-00
Lower limit