Panasonic KXF-193C Operating Manual Download Page 196

Page: 196 / 206

Page 8-4

8-5

Feedback History

The history of print condition recognition result is displayed.

All data Delete

All data is deleted.

Form Print

The recognition result is output.

8-4

Feedback Range

The conditional value of feedback range is displayed all together, and it can be checked and
corrected.

• The area of mask opening is compared with that of solder printed, and the printing condition is

checked. In that case, OK, NG, or re-check for judgment reference is set. Also, the area of mask
opening in mask recognition teaching is compared with that of solder remained on the mask after
printing. Then set the judgment reference.

Default

The value is recovered to the default value.

193C-E-EMA08-A01-01

Summary of Contents for KXF-193C















































































































































































































Search results

Summary of Contents for KXF-193C

Reviews:

Related manuals for KXF-193C

Brands by name

Popular brands

Panasonic KXF-193C, Operating Manual

Search results

Summary of Contents for KXF-193C

Reviews:

Related manuals for KXF-193C

Brands by name

Popular brands